Luna-optics LN-DM50-HRSD Bedienungsanleitung Seite 4

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 8
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 3
Glossary:
1 Objective Lens Focusing Wheel 9 Video Recorder Button
2 Ocular Focusing Wheel 10 Still Image Button
3 Battery Compartments 11 Image / Zoom Button
4 Accessory / Tripod Mount 12 Power ON/OFF Button
5 Video Output 13 Infrared / Menu Button
6 Infrared Illuminator 14 Brightness Wheel
7 SD-Card / USB Compartment 15 SD-Card Slot
8 DC Output 16 USB Output
INSTALLING THE BATTERIES:
Your night vision unit operates on two 3V Lithium type batteries, known as
CR123 type commonly available in Electronics/Camera/Convenience stores.
NOTE: if using rechargeable batteries make sure each battery voltage is less
than 3.3V
To install the batteries, unscrew the battery compartment covers (3), located
on the back of the unit (one on each side below the ocular (2) and install one
battery into each compartment inserting the positive (+) end first. Once the
batteries are inside, replace the covers.
TURNING THE UNIT ON AND OFF:
Your night vision unit has one-touch push-buttons. To turn the unit ON, first
remove the objective lens cover (1) and press the power button (12) once
and immediately release it. The green light indicator located on the back of
the unit should light up. Look through the ocular you should see the
Welcome screen for a few seconds, followed by image. Even if the image is
not yet sharp, the unit is operating. To turn the unit OFF, press and hold the
power button for 2 seconds. The image will disappear if you turn the unit off
correctly. Always replace the objective lens cover after the unit is turned off
and no longer is in use.
IMPORTANT: When turning the unit ON it is normal to see some image
flickering, as the components warm up to display the image. This is normal
and does not affect the unit. If the flickering continues after 5-10seconds,
please try to decrease the brightness of the image by gently rotating the
Brightness Wheel (14)
Your digital viewer can also operate from a common wall outlet with the use
of the plug adapter (included). Remove the batteries and Insert the adapter
cord into the DC Output (8)
Seitenansicht 3
1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare